Call Us Today
-
-
Working Hours
Mon - Fri: 9 am to 6 pm
-
Markaz Almana
Doha, Qatar
Powering The Performance
Automotive Motor Oil (Petrol & Diesel)
On-Demand Products
CRYSTAL HYDRO S SERIES
CRYSTAL HYDRO S SERIES 32-37-46-68-100 is hydraulic oil series suitable for machinery when hydraulic power is used. (Presses, workbenches, plastic injection and drawing machines, air compressors and others) Dut to its anti-wear property, it provides long life for the pumps used.
TDS and MSDS Available on Demand
CRYSTAL HYDRO T SERIES
CRYSTAL HYDRO T SERIES 15-22-32-46-68 are high anti-wear hydraulic oils. The high viscosity index is obtained by mixing special corrosion resistant polymers with high quality paraffinic oils. This type of oil shows excellent performance in extreme temperature changes.
TDS and MSDS Available on Demand
CRYSTAL HYDRO ZF SERIES
CRYSTAL HYDRO ZF SERIES 46-68 are in the group of hydraulic oils containing a new generation additive package that does not contain zinc and chlorine and meets the requirements of many hydraulic equipment manufacturers. Provide very high protection in rainy working conditions.
TDS and MSDS Available on Demand
CRYSTAL HFDU SERİSİ
TDS and MSDS Available on Demand
CRYSTAL HYDRO HFC
CRYSTAL HYDRO HFC is a polyalkylene glycol mixture. It is a clear liquid with excellent lubrication and long life, excellent corrosion and wear protection. It is formulated to provide protection against rust in both steam and liquid phases
TDS and MSDS Available on Demand
TURBINE OIL SERIES
TURBINE OIL SERIES have outstanding thermal and oxidation stability prevents sludge formation, controls deposits and minimises, oil degradation, Superior rust inhibitors provide long term production, High Viscosity Index minimises affect from temperature changes, Antifoam property prevents fim layer rupture.
TDS and MSDS Available on Demand
CRYSTAL SLY
CRYSTAL SLY 32-68-100-150-220 oils are specially developed for the lubrication of machine tools. These oils used in the gearboxes, bearings and hydraulic systems of the machine tools enable the slides to move smoothly and ensure the smoothness of the machined surfaces
TDS and MSDS Available on Demand
CRYSTAL SLY 68X
TDS and MSDS Available on Demand
CRYSTAL GEAR OIL SERIES 90-140
These oils are high quality plain mineral oil mixtures and are used in all automotive applications that are stable and do not require excessive pressure additives. It can be used in most manual transmissions and spiral axle gearboxes.
TDS and MSDS Available on Demand
CRYSTAL GEAR OIL EP SERIES 90-140
High quality industrial gear oils consisting of high viscosity index oils containing phosphorus and sulfur based overpressure additives. It is used in bathroom, sputtering, circulation and spray type lubrication systems, closed gears, reducers, flat and roller bearings, flexible concepts and similar equipments especially under heavy load, extreme pressure conditions.
TDS and MSDS Available on Demand
CRYSTAL GEAR EP 68-100-150-220-320-460-680
High quality industrial gear oils consisting of high viscosity index oils containing phosphorus and sulfur based overpressure additives. It is used in bathroom, sputtering, circulation and spray type lubrication systems, closed gears, reducers, flat and roller bearings, flexible concepts and similar equipments especially under heavy load, extreme pressure conditions.
TDS and MSDS Available on Demand
CRYSTAL CLASS 1005-1032-1050-1110-1150
They are used in applications where high amount of additives are not required and economic lubrication is in the foreground. Suitable for worn motors, some gearboxes and compressor types.
TDS and MSDS Available on Demand
CRYSTAL FHL 15-32-50-100-150
They are used in applications where high amount of additives are not required and economic lubrication is in the foreground. Suitable for worn motors, some gearboxes and compressor types.
TDS and MSDS Available on Demand
CRYSTAL HYDRO C10
It is specially developed for the lubrication of air conditioners and circuit elements. It can be used in hydropneumatic control mechanisms and pneumatic circuit lubricants as well as used in various applications of high speed looms.
TDS and MSDS Available on Demand
CRYSTAL THERMOIL SERIES
Thermoil heat transfer oil is a high quality heat conduction oil with low vapor pressure, high oxidation resistance and heat stability, which is prepared for operating temperatures from –15 ° C to + 320 ° C in closed systems.
TDS and MSDS Available on Demand
CRYSTAL THERMFLUSH
THERMFLUSH has excellent thermal stability with high detergent and dispersing properties. Fully miscible with mineral based heat transfer oils.
TDS and MSDS Available on Demand
CRYSTAL COMPRESSOR OIL 32-46-68-100-150
They are high quality compressor oils which are produced from high quality mineral base oils and developed for use in reciprocating, rotary and screw type air compressors with air outlet temperature reaching up to 220 °C. ISO VG 100 and VG 150 are suitable for reciprocating types and ISO VG 32,46,68 are suitable for rotary and screw compressors.
TDS and MSDS Available on Demand
CRYSTAL COMPRESOR OIL SH (CPR SINT) PAO
TDS and MSDS Available on Demand
CRYSTAL QUENCH 1690
It is a low viscosity, high performance, very high heat treatment oil. They are usually used in open bathrooms. Thin high-performance CRYSTAL QUENCH 1690 is mainly used for high hardening ability in alloy and non-alloy reclaim cementation applications and good hardness depth in thick sections.
TDS and MSDS Available on Demand
CRYSTAL QUENCH 2210
It is a high performance oil with very high hardening properties. They are usually used in open bathrooms. The high-performance CRYSTAL QUENCH 2210 is generally used for high hardening capability in alloy and non-alloy reclaim cementation applications and good hardness depth in thick sections.
TDS and MSDS Available on Demand
CRYSTAL QUENCH 2770
It is a high performance hardening oil with high hardening capability and very little evaporation. These oils have been developed for use in closed and open pit systems. It prevents the atmosphere (atmosphere) in which the process is performed to be negatively affected by oil vapor and provides rapid disintegration of the vapor film in the charge. Because of this feature, all materials in the process can be cooled homogeneously and quickly.
TDS and MSDS Available on Demand
CRYSTAL ALCACLEAN MP
It is a high alkali cleaning and deburring liquid which is used for removing oil and dirt from the surfaces of rich alloy steel, steel and gray cast iron parts and also has corrosion prevention feature. Protects metal from all kinds of oil, dirt and burrs before paint or coating
TDS and MSDS Available on Demand
CRYSTAL SOLBLACK SFX
Diluted with water and used for darkening, bluing of screws, bolts and nuts. It is used by adding 5% to 8% in water at 60-70 ° C.
CRYSTAL SOLBLACK SFX, is easily dilutable in water, forming a milky emulsion that is stable and long life resistant in high temperature too.
TDS and MSDS Available on Demand
CRYSTAL CUT HS 15-25-32-35-50-68-100-150-220-2200 Plus-5200 Plus
They are produced in different viscosities especially for screw, nut manufacturing and deep hole drilling operations. High pressure additive package (EP) and special raw material formulated with high oxidation resistance.
TDS and MSDS Available on Demand
CRYSTAL CUT HS N Serisi
TDS and MSDS Available on Demand
CRYSTAL CUT HS NS SERIES
They are pure cutting oils containing high pressure additive package designed for cold forming processes. Does not contain chlorine, nitrate, amine and derivatives. Our cold forming pure cutting oil is a light colored stain-free cutting oil suitable for yellow metal developed especially for bronze and red beds.
TDS and MSDS Available on Demand
CRYSTAL CUT S 15,22,25,32,37,46,68
They are dark brown cutting oils containing excessive pressure additives consisting of sulfur, active sulfur and sulphurized additives. They are especially used in chip removal of steels, including alloyed steels.
TDS and MSDS Available on Demand
CRYSTAL DRAW SBT
It is a high performance spinning oil and is used for demanding bending, drawing, spinning and forming of metals. Thanks to its EP additives and soap molecules in its formula, it provides long machine life and its superior lubrication feature improves the surface quality of processed materials, minimizes crushing under load and contains slides that prevent cracking.
TDS and MSDS Available on Demand
CRYSTAL CUT MA SERIES
Cut MA series are new generation oils with very low viscosity. Surface cleaning is also extremely high. This product has been developed for honing cast iron and hardened steels, which are hardened by heat treatment process and obtained short chips, and used for gear grinding at high speeds.
TDS and MSDS Available on Demand
CRYSTAL CUT H SERİSİ
TDS and MSDS Available on Demand
CRYSTAL CUT M15 AL
It is formulated with special raw materials and additives with very high oxidation resistance and is recommended for use in environments where high temperature is difficult, especially in machines where temperature control cannot be achieved.
TDS and MSDS Available on Demand
CRYSTAL CUT M SERIES
They are yellow cutting oils containing excessive pressure additives consisting of sulfur, active sulfur and sulphurized additives in its composition. They are also used in chip removal of steels, including alloyed steels.
TDS and MSDS Available on Demand
CRYSTAL CUT DX 68
They are used in the machining of high-alloy steels, stainless steels and some non-ferrous alloys, in particular for broaching, deep hole drilling and tapping, teeth shaving and machining.
TDS and MSDS Available on Demand
CRYSTAL MA PLUS SERIES
are special cutting fluids which are used as purely, without mixing with water in low aromatic structure. They do not contain new generation heavy metals with very low viscosity. The low viscosity of high-quality finishing is particularly suitable, and the high pressure EP additive and AW anti-wear additive package extend tool life.
TDS and MSDS Available on Demand
CRYSTAL DRAW K 18
They are high performance cold forming oils and are used in tough straightening of metals. Provides long machine life and superior lubrication, improves the surface quality of the materials being processed, and also includes sliders that minimize crushing under load and prevent cracking.
TDS and MSDS Available on Demand
CRYSTAL CUT XLE 22
It is a full synthetic, honing and cutting oil produced with a non-conventional base oil obtained by a method different from the refining of crude oil. Thanks to this special synthetic base oil, which constitutes a large part of its content, it surpluses other oils available on the market with its unique physical and chemical properties.
TDS and MSDS Available on Demand
CRYSTAL CUT XLE 32
It is a full synthetic, honing and cutting oil produced with a non-conventional base oil obtained by a different method from the refining of crude oil. Thanks to this special synthetic base oil, which constitutes a large part of its content, it surpluses other oils available on the market with its unique physical and chemical properties.
TDS and MSDS Available on Demand
CRYSTAL CUT VG SERIES
are specially refined oils, especially with low viscosity, resistant to oxidation and provide corrosion protection. It is classified according to DIN 51517 part 2 (cl). In these products, the suction pressure capacity is increased and the wear is reduced by the addition of EP.
TDS and MSDS Available on Demand
CRYSTAL KTNR H
It is a special volatile stapling and press oil which is produced by blending special isoparaffinic solvents with volatility feature and containing high EP (extreme pressure) additives. After application, it evaporates away from the material and thus enables further processing.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL BR
It is a synergistic combination of various surfactants, corrosion inhibitors EP additives and mineral oils. It is an excellent mineral metal working fluid used in the machining of iron alloys, CNC machines, pipe industry
TDS and MSDS Available on Demand
APEXSOL CT 891 H
It is a high-performance, semi-synthetic metalworking fluid developed for universal metalworking operations. It is a synergistic combination of various surfactants, corrosion inhibitors, EP additives and mineral oils. It is compatible with hard water and forms stable mixtures.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 830
It is a high performance metal working fluid containing EP additives and synthetic lubricants developed for medium and heavy metalworking operations. It is suitable for both central systems and individual storage machines. It is compatible with hard water and forms stable mixtures
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 840
It is a metalworking fluid containing high performance synthetic lubricants developed for heavy-duty metalworking operations. It is suitable for both central systems and individual storage machines. It is compatible with hard water and forms stable mixtures. High resistance to microorganisms, biostable.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 865
CRYSTAL APEXSOL CT 865 Synthetic Metalworking Fluid is a high performance synthetic product developed for universal metalworking operations. It is suitable for both central systems and individual storage machines. It is compatible with hard water, it forms stable mixtures.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 81 G
It is a high-performance, semi-synthetic metalworking fluid developed for universal metalworking operations. It is a synergistic combination of various surfactants, corrosion inhibitors, EP additives and mineral oils. It is compatible with hard water and forms stable mixtures.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 870 - Semi-Synthetic Metalworking Fluid
A high performance semi-synthetic metalworking fluid developed for universal metalworking operations. It is suitable for both central systems and individual storage machines.
TDS and MSDS Available on Demand
CRYSTAL APEXSOL CT 891 HB
TDS and MSDS Available on Demand
CRYSTAL EDM SC
EDM SC is very suitable for very precise and fine machining of small parts. EDM SC has high oxidation stability. EDM SC is an aromatic free product organized under FDA C class product. EDM SC is classified as a biodegradable product with 80% biodegradability.
TDS and MSDS Available on Demand
CRYSTAL NO-RUST 40-30
Provides excellent rust protection on metal surfaces. Thanks to its hydrophobic (water repellent) feature, the product has a long service life. When the product is used without any dilution with solvents (100% concentrate), it forms 2-3 μ thick dry film on the metal surface.
TDS and MSDS Available on Demand
CRYSTAL NO RUST 50-32
Superior rust protection in metal surfaces, Longer product life due to hydrophobic (water repelling) property, 6-8 μ film thickness is provided on metal surface when used with solvent (100% concentrate, no dilution), No finger prints due to dry film layer, 12 months of protection on metal surfaces under shelter, in closed environment protection is 24 months.
TDS and MSDS Available on Demand
CRYSTAL NO RUST 52-00
Provides excellent rust protection on metal surfaces. Thanks to its hydrophobic (water repellent) feature, the product has a long service life. When used without any dilution (100% concentrate) with solvents on it, it forms a film layer of 4-6 μ thickness on the metal surface.
TDS and MSDS Available on Demand
CRYSTAL ANTI-RUST 15-50-75-100-150-200
They consist of a combination of hydrocarbons, film-forming corrosion inhibitors (sodium and calcium sulphonates) and solvents. They are protective oils that prevents oxidation and corrosion in ambient conditions such as air, water and moisture during the intermediate storage or transportation of all kinds of iron and steel and coating materials.
TDS and MSDS Available on Demand
CRYSTAL RUSTSTOP 800 C
CRYSTAL RUSTSTOP 800 C is an excellent corrosion inhibitor that meets the Federal specification VV – L requirements. It maintains its fluidity at low temperatures and has the ability to remove water from the metal surface and eliminate fingerprints. It is effective even in high humidity environment.
TDS and MSDS Available on Demand
CRYSTAL RUST REMOVER
It is a special product developed for removing rust, oil and welding tarps from metal surfaces. Very effective results in a short time. Thanks to its phosphoric acid content, if it is used extensively, it covers the surface at microscopic level and makes phosphate ready for painting.
TDS and MSDS Available on Demand
CRYSTAL OPTIMA SERIES
Light-colored cutting oils formulated with highly refined base oils. Lubrication and heat resistance feature has been developed for multi-purpose applications. It is specially formulated to work with yellow metals.
TDS and MSDS Available on Demand